BMT Products

Durocell

The Durocell comes equipped with a highly resistant coating of EPOLON that protects the inner stainless steel chamber and surfaces from aggressive agents such as acids and solvents. The ovens are ideal for basic hydrolysis, extraction through incombustible substances, and decomposition of substances at a solid phase.

Features include:

  • Ability to store 3 separate user-programmed cycles
  • RS 232 interface for printer or PC communication
  • Delayed start and stop function
  • Time range up to 99 hours and 59 minutes
  • Digital temperature readout
  • User-friendly interface
Specifications   Model 22 55 111 222
Interior dimensions volume ft3 0.776 1.94 3.92 7.84
    liters 22 55 111 222
Interior made of AISI 316L width inches 9.4 15.75 21.26 21.26
stainless steel   mm 240 400 540 540
  depth inches 12.6 15.35 15.35 21.26
    mm 320 390 390 540
  height inches 11.6 13.78 20.87 29.92
    mm 295 350 530 760
Shelves number of shelf guides max number 4 4 7 10
  in chamber side walls shelves incl. 2 2 2 2
Maximum weight of load(*) Per tray Max lbs 22 44 44 66
  Max. inside oven Max lbs 55 110 110 154
Door   No. 1 1 1 1
External dimensions width inches 16 24.41 29.92 29.92
(including door and handle)   mm 406 620 760 760
  depth inches 23 25.2 25.2 31.1
    mm 580 640 640 790
  height inches 24 26.77 33.86 42.91
    mm 604 680 860 1090
Weight net lbs 68 121.25 165 221
    kg 31 55 75 100
  gross lbs 79 134.5 185 258
    kg 36 61 84 117
             

STANDARD LINE CONTROL SYSTEM

The microprocessor based control system automatically controls all phases of the process. Temperature control is based on “fuzzy logic” to ensure the fastest possible cycle without overshoot of the temperature set point.

Features Include:

  • 304 stainless steel chamber with EPOLON coating
  • Working temperature from 5°C to 250°C (300°C as option)
  • 5” of insulation for low heat radiation
  • Natural low velocity air flow
  • Easy open door latching system
  • Attractive look and design
  • Removable air distribution plates (no tools required)
  • Two internal wire shelves included


COMFORT LINE CONTROL SYSTEM

The microprocessor based control system has all the features of the Standard Line Control System with the addition of the following:

Features include:

  • Ability to store 6 separate user-programmed cycles, 40 segments
  • Chip card system for individual program storage
  • Delayed start and stop function
  • Time range 0 – 16 years with 1 min. intervals
  • Digital safety thermostat class 2
  • Programmable temperature ramps
  • Heating sequences

Durocell Available Options

  • Movable stand
  • Access ports with dia. 25, 50 & 100 mm program storage
  • Key or electronic door lock
  • Left door hinge
  • WarmComm software for communication with a PC
  • Potential-free alarm contact
  • Moveable temperature measurement device (PT 100 sensor)
  • Stainless steel cabinet